2025年1月24日 · Plywood can be sourced from hardwood suppliers but at a much higher price but with more core options and options for surface veneers. For example good 1 side or good both sides and veneer core or plywood core.

2008年4月14日 · Using a Kreg softwood/plywood coarse thread self-tapping 1 1/2 inch screw, I fastened together two pieces of 3/4" baltic birch plywood butt jointed at 90 degrees to each other. The side with the head of the screw touching it was predrilled halfway through the plywood because I was simultaneously testing a plug cutter.

2020年12月15日 · The plywood hole will soak up a lot of glue and the dowel may swell some. Too much glue will cause more problems than too little. Not all plywood is equal. Use a good grade with as many layers as you can find. 11 ply baltic birch has very few hidden voids. I use 1/4 dowels in plywood.

2024年12月31日 · More info for the 13 layer 3/4 inch plywood would help others find it too. I looked online at our local stores in Southern California and could not find 13 layer 3/4 inch birch plywood at any price. I found a 9 layer one and others with cores.

2014年3月12日 · DESCRIPTION: Large warehouse with architectural grade plywood and veneers, hardwood lumber (both domestic and import), laminates, acrylics and composites. Heldt Lumber 5712 N 7th St, Phoenix, AZ 85014 (602) 277-3378 DESCRIPTION: danoaz: Mostly construction grade material with lots of plywood. Outside yard with covered wood storage.

2024年2月11日 · I found an old thread (2012 or so..) asking about butt joining plywood, but it ended up actually being a question about a typical box joint. But before discovering the actual question, a couple of people suggested methods for a plywood butt joint that I was hoping for more info on. Of course, other ideas would be most appreciated! 1.

2011年2月18日 · Another option is to laminate a 3/4" and 1/2" piece of plywood to help with sagging. A third option is to attach 3/4" thick by 1.5" wide pieces of solid wood matching the shelf material on the front and back of the shelf effectively adding stingers along the length to help reduce or eliminate sagging from the weight.

2023年9月23日 · Finishing plywood is no different than finishing solid wood except you don't want to sand (or scratch) very hard and cut through the veneer. The inside plies are not the same as the surface, will look ugly, and you'll have the glue layer to boot. I've varnished oak on boats where it holds up pretty well (above the water line.)

2021年1月5日 · Good prices for what I've been using, which is mostly poplar and pine. I don't recall seeing any plywood in the showroom, but I wasn't really looking for it at the time. I've also tried Marson and Marson's, another local hardware store/lumber yard. Their lumber is all outside getting snowed on and their plywood didn't look any better than HD or ...

2020年5月30日 · I cut four twelve inch lengths of 1 1/2" aluminum, SLOTTED angle bracket to fit the front and back INSIDE the carcasses. Here's where the threaded inserts come in. I used four 1/4-20 inserts, front and back, along the angle bracket in both the plywood carcass and along the underside of the desktop.