This should be the same for almost every generator you might have, so if you have a generator that needs a stator and rotor removed this is the video for you...

2019年3月7日 · In order to remove a generator stator and armature you will need a puller, socket set, WD40, steel rod, hack saw, tap and a bolt. Every generator is different so do what...

This video was removing the stator and rotor out of my generator to confirm my worst fears that the stator is shot. Sorry that this video had the same endin...

Rotor or Engine only Removal: When removing the rotor only, it is usually much faster to remove the engine from the generator chassis. When doing the removal by this method, you can leave all the wires intact on the generator's stator attached to the terminal block underneath the yellow end cover of the unit.

This guide shows how to remove and replace the stator for the Honda EU3000IS1AWK 3000 watt generator. You will need the following specialty tools in order to complete this guide: Flywheel puller kit with metric bolts (in order to remove the rotor)

This guide shows how to remove and replace the stator for the Honda EU2200IT generator. This is a very involved procedure and requires major disassembly. If you encounter problems during the process, consult the official Honda service guides.

This guide demonstrates how to remove or replace the rotor and stator assembly on your Honda EB3000CK2A 3000 Watt Generator. The rotor and stator are removed as one unit. If you need to replace the rotor or stator individually, consult the generator’s service manual.

To remove the stator, first remove the end cover of the generator. Inside, remove the brush block, and remove any wiring connecting the stator to the receptacle panel. Remove the 4 long mounting bolts. Use a puller to gently pull the bearing carrier off. Then you can carefully pull the stator off.

NEED A PART? Need a replacement part? Visit our online parts store available 24/7 to find and purchase common replacement parts. For additional help call us at 1-877-338-0999.. Shop for parts...

Rotor or Engine only Removal: When removing the rotor only, it is usually much faster to remove the engine from the generator chassis. When doing the removal by this method you can leave all wires intact on the generators stator attached to the terminal block underneath the yellow end cover of the generator.