We only need two: plumbing vent and radon. The way the house is configured we have 3 options - take them straight up through the (insulated) ceiling from the HVAC room, take them out the (front) wall and through the soffit/eaves/roof or take them out the wall and pull them around the edge of the roof with no penetrations.

2022年2月8日 · If the vent system is soffit/ridge paired, then the 1/300 calculation would apply. Meaning 3.33, rounds up to 4 upper box vents if paired with an equal amount of soffit venting. Assuming you have clear soffit vents of at least 3.33sf total, the number of box vents you currently have is sufficient.

2021年10月19日 · Cut a hole for the vent in the soffit, bring the ductwork out and attach to the vent, and then screw in the vent and caulk around the edges. People will tell you soffit vents are no good, but they’re better than venting into the attic and unless you know what you’re doing, I wouldn’t recommend cutting a hole in your roof.

2023年10月18日 · Roof Vent Placement Our house has 3 bathrooms: 2 have no exhaust fans, the other has an exhaust fan that has long tubing in the attic and vents out the side of the house rather than the roof. We will be adding in 2 fans and upgrading the 3rd.

Connecting the resulting roof stack to the bathroom vent fan only requires some ducting (your local code may require rigid duct) and anyone with a screwdriver can do that, including a handyman. Again, research local requirements because you may have to apply mastic (sealant) to the ductwork; my local code requires that.

2021年11月25日 · Color looks LEGIT with the houses color scheme. A couple of ways I’ve seen the vents minimized is by locating a majority of them on the backside of the roof (which looks kind of like the schematic drawing), OR opting for a ridge vent the runs continuously along the ridge and isn’t really noticeable

2022年5月26日 · I’ve installed a lot of static dome vents (Lomanco 135) because they sit closer to the roof. The power vents are the same but will move air a bit quicker. Ridge vent is good but some homes don’t have enough ridge to adequately vent the attic and some rafter/truss configuration isn’t designed to have ridge vent installed.

2018年4月13日 · One vent six feet from front and another six feet from rear. I paid an RV guy to put another in the center of the coach because I did not want to be the one to cut into my roof. Then I went to the rear of the coach and made a small bracket to hold 2 - 6 VDC computer box fans attached to the center support on vent with one fan on each side.

2021年11月20日 · Posted by u/RemAcuTetigisti - 2 votes and 4 comments

2023年2月28日 · The only option I've been able to give customers is to really think about vent placement, and maybe consider moving the vents, or switching from ridge vent to turtle vents so it isn't along the entire roof and just a few spots