BASIC Stamp. For example, when trying to detect which BASIC Stamp is connected to a given serial port, if one identify routine fails, you can immediately perform a reset sequence followed by a different identify routine. The DTR pin (DB9 pin 4) of the serial port is connected to the BASIC Stamp’s ATN pin (see Figure 2).

BASIC Stamp® 2px Microcontroller (BS2PX-IC) This document is an addendum to the BASIC Stamp Syntax and Reference Manual v2.1 and provides information about the BASIC Stamp 2px that is not included in BASIC Stamp Manual. If, at the time you read this, Version 2.2 of the BASIC Stamp Syntax and Reference Manual is available, Parallax, Inc. highly

2016年6月17日 · Yes. Im planning to change our PIC to basic stamp 2. The process is exporting the mp3 files via usb cable and syncing and programming the schedule of the alarms via serial port 9-pins.

2000年8月18日 · >> i am wondering if there is a way of making the basic stamp 2 read >> frequeny as like a frequency counter. the counter only has to read >> upto 20 mhz.. i have the max7219 with 3 displays tied to it. i >only >> need to have the display read 3 digits after the decmal point. i >> dont need any specail input circuit since it will be reading a 5

2007年1月10日 · It’s really better to figure in the pulse duration, the pause time, and the BASIC Stamp’s fetch and execute time for the PBASIC loop. The PointTwoDirections.bs2 program below has two loops. From inspection, both loops will last about 3 seconds (150 reps), pointing the clock hand from Figure 2 at 10:30 (PULSOUT 14, 1000).

2010年3月18日 · BASIC Stamp Windows Editor v2.5 - (Supports Windows 2K/XP/Vista/7) Includes software, USB driver, example code and help for all BASIC Stamp modules.

2018年4月1日 · Keep in mind that neither the PIC nor the Stamp can directly drive more than about a 20mA load so you'll need some kind of driver chip if you intend to control more than that. There are plenty of examples in the Stamp's documentation on the use of a stepper motor and the hardware would be essentially the same for a PIC.

2006年1月19日 · · What you can do, though, is use serial, and you can even multi-drop it to have more than one BASIC Stamp slave. · If you are going with just one slave, you can use two wires and get flow control so the master doesn't attempt to send a command when the slave is busy.

2007年6月21日 · The BASIC Stamp Editor (version 2.2) won't detect my BS2. I had a similar problem. · Turned out to be that I hald the Palm Desktop software installed on my PC and it was hogging the COM port.

2023年5月28日 · Project ideas, support and related topics for the Parallax BASIC Stamp. « 1 2 3 4 5 6 7 … 631 »