2024年7月23日 · Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it. If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.

2024年7月23日 · Select [ Sensor cleaning], press the <SET> button. EOS 10D: Select the menu [Sensor cleaning], press the <SET> button. ... If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended. Rate This Article. Was this article helpful?* Like Dislike. Is there a comment you would like to ...

Right after the sensor cleaning is finished, the [Clean now] option will remain disabled temporarily. If there is dirt or dust that cannot be removed by following the procedure above, please see Manual Sensor Cleaning(Digital Single-Lens Reflex Camera) or Manual Sensor Cleaning(Interchangeable-Lens Compact System Camera) .

Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it. If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.

2017年12月15日 · Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it. If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.

2017年12月15日 · Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it. If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.

2017年11月17日 · Pressurized air may damage the sensor, and sprayed gas may freeze on the sensor and scratch it. If the battery level becomes low while cleaning the sensor, the beeper will sound as a warning. Stop cleaning the sensor. If a smudge that cannot be removed with a blower remains, having the sensor cleaned by a Canon Service Center is recommended.

However, you can execute the sensor cleaning at anytime as well as disable it. 1. Set the power switch to <ON>. 2. Press the <MENU> button to display the menu. 3. Select the Sensor Cleaning settings. 3-1. Press the <Cross Keys> to select the [ ] tab, and then press the <Cross Keys> to select [Sensor cleaning]. 3-2.

2015年3月4日 · Normally, the Self Cleaning Sensor Unit will eliminate most of the dust that might be visible on captured images. However, in case visible dust still remains, you can append the Dust Delete Data to the image for erasing the dust spots later. The Dust Delete Data is used by the Digital Photo Professional software* to erase the dust spots ...

Clean the sensor with care. Use a plain blower without any brush attached. A brush can scratch the sensor. Do not insert the blower tip inside the camera beyond the lens mount. It can damage the shutter curtains. Never use canned air or gas to clean the sensor. The blowing force can damage the sensor or the spray gas can freeze on the sensor.