2019年2月12日 · If you're really concerned about the weld quality on the unistrut, you could add a small plate (a bit wider than the unistrut) between the unistrut and the HSS - weld the plate to the unistrut on the ground/in the shop where the legs hit the plate, and then weld the plate to the HSS as you have detailed.

2024年1月6日 · Unistrut was welded directly to the new steel and provided only as a means of attaching the track system to the new steel. Deflection controlled the design. Our C-arm was actually mounted on a track system so the C-arm could be moved around in …

2016年2月1日 · Power Strut = Unistrut (same company and they've even started stamping both part numbers on their fittings). Not sure what you are looking for regarding generic design procedures Upvote 0 Downvote

2009年8月11日 · Problem will be that Unistrut can't really "calculate" their total properties because the tip (ends) of the Unistrut fold over in a rolled-U bend: The U makes the end of each wall much stiffer against twisting and bending in-plane than a if you assume a straight-walled "channel" of the same metal type and thickness.

2010年3月12日 · The angle iron and unistrut are especially appealing because there is no welding required. Also, for that same reason, the stand is extendable, parts can be replaced, etc... without much challenge There are two main threads on HBT with a zillion posts each. Very hard to parse to get summary info, but lots of gems embedded.

2016年3月1日 · Power Strut = Unistrut (same company and they've even started stamping both part numbers on their fittings). Not sure what you are looking for regarding generic design procedures RE: Unistrut Seismic Bracing Systems

2004年5月24日 · Open side of unistrut bar is facing the motor driving the ball screw and a steel plate having a ball nut is bolted on the open side of bar,in the middle of 30" span. Bar is bolted to load table. As the screw rotates, it moves the ball nut, attached to bar in axial direction thus moving the load table.

2018年3月21日 · The Unistrut General Engineering Catalog has section properties for each strut section. See pages 24 and 25 for the orientation of the axes and the properties listed below. See pages 24 and 25 for the orientation of the axes and the properties listed below.

2014年5月9日 · In the unistrut engineering catalog, ive come across this verbiage: "When used for mechanical supports, load capacities of brackets and fittings should be in compliance with the American Standard Code for Pressure Piping." The design of the unistrut for the piping seems straightforward enough, but does anyone know what the warning is here?

2012年10月23日 · Started my stand build tonight. I like the weldless concept, but didn't like the thin (relative to Strut material) wall section of the angle stock I was seeing at Lowes/HD. I looked into this material after seeing a few others use it, and designed my custom 2 station stand (1 pump, will keep...